Removal and installation
1. Remove the rear wheel assembly.
2. Disconnect the line (1) from the rear suspension trailing arm (2). To do this, remove the clips from the holes in the arm, as shown in the figure below.
3. Using special mounting tapes, secure the assembled vehicle to the lift supports.
4. Place a special jack under the rear suspension cross rod and load the suspension (1).
5. Unscrew the mounting bolts (2) and (3) shown in the figure below.
6. Remove the jack from under the rear arm.
7. Disconnect the line (2) from the mounting bracket (1) shown in the figure below.
8. Mark the installation position of the mounting bracket (1) relative to the vehicle body.
9. Unscrew the mounting bolts (arrows).
10. Remove the rear suspension trailing arm assembly with the mounting bracket.
11. Installation is carried out in the reverse order of removal.