Timing belt cover for gas distribution mechanism drive
General appearance: 1. Lower cover of the timing belt; 2. Fastening screw, tightening torque during installation 8 Nm; 3. Engine support bracket; 4. Mounting screw; 5. Upper cover of the timing belt; 6. Fastening screw, tightening torque during installation 8 Nm
Timing belt for gas distribution mechanism drive
General appearance: 1. Gas distribution mechanism drive belt; 2. Timing belt tensioner roller mounting bolt, tightening torque during installation 25 Nm; 3. Tensioner roller; 4. Fastening screw, tightening torque during installation 7 Nm; 5. Lid; 6. Mounting bolt, tightening torque during installation 50 Nm + tighten additionally by an angle of 135°; 7. Toothed pulley of the exhaust camshaft drive; 8. Guide sleeve; 9. Toothed pulley of intake camshaft drive; 10. Mounting bolt, tightening torque during installation 50 Nm + tighten additionally by an angle of 135° 11. Sealing ring; 12. Threaded plug, tightening torque during installation 20 Nm; 13. Intermediate sleeve; 14. Guide roller, installation tightening torque 45 Nm; 15. Mounting bolt, tightening torque during installation 40 Nm; 16. Crankshaft toothed pulley
Original text is located on [skodabook.ru]