Note: Lubricate all bearing and contact surfaces with grease "G 000 450 02".
1. Overlay: bend the tabs to remove; is subject to mandatory replacement
2. Seal: must be replaced
3. Gear shift lever
4. O-ring with circular cross-section; put it on the "arrow" shift handle until it stops; if damaged, replace
5. Safety bracket: do not damage when dismantling the cables; is subject to mandatory replacement
6. Gear selection cable
7. Gear selector cable bushing
8. Gear shift cable
9. Buffer
10. When dismantling the bearing insert, the projections of the bearing insert are usually damaged; is subject to mandatory replacement
11. Bushing
12. Retaining ring
13. Pressure spring
14. Bushing
15. Gear shift lever guide
16. Nut: M8 - 25 Nm; M6 - 8 Nm
17. Seal: between the gearshift housing and the underbody; self-adhesive
18. Gearshift housing: with pressure spring and selector angle; the pressure spring and selector bracket cannot be removed
Installation position of the switching mechanism
-Arrow A- movement of the gear shift lever
-Arrow B- movement of the selector lever
A. Gear shift cable
B. Gear selector cable
C. Heat shield: remove before removing shift mechanism
1. Gear shift lever
2. Intermediate lever