Maintenance Specifications (All Models) (Skoda Felicia)

Petrol models
Volumes of working fluids
Engine oil (including oil filter), l
Engine 1.3 l	4.5
Engine 1.6 l	3.5
The amount of oil required to raise its level from the MIN mark to the MAX mark on the dipstick, l	1.0
Engine coolant, l	6.0 (approximately)
Transmission oil, l	2.4 (approximately)
Fuel tank capacity, l	42*
* The tank capacity for carburetor models is 47 l
Engine
Oil filter:
Engine 1.3 l	Champion C165
Engine 1.6 l	Champion C161
Valve clearances (1.3L engine), mm
Intake valves
steel pushers	0.20
aluminum pushers	0.25
Exhaust valves	0.20
Cooling system
Coolant type
Manufacturer Velvana Velvary	Fridex D 824 HS
Manufacturer BASF AG	Glysantin G 05-25
Manufacturer VW	G 11 V8B
Manufacturer Dt. Shell Shemie GmbH	GIIIysoshell AF
Manufacturer DOW Shemosal GmbH	Antifreeze D 824 HS
Manufacturer Dt. BP AG	Antifreeze H 129 B
Manufacturer Hoeshst AG	Genantin LP 1864/2
Frost resistance:*
40% antifreeze	up to -25°C
50% antifreeze	up to -35°C
55% antifreeze	up to -45°C
* The maximum permissible antifreeze content in the mixture is 60%, which ensures the liquid's frost resistance down to -40°C. A further increase in the antifreeze concentration in the mixture only leads to a deterioration in the parameters
Power supply system
Manufacturer/Type
AEE engine	Magneti Marelli
Engines 135M, 136M	Simas 2P
Engines 135V, 136V	Bosch MonoMotronic
Air cleaner filter element:
1.3 L models with central injection (SPFI)	Champion W222
Models with multipoint injection (MPFI)	Champion U582
Fuel filter	Champion L201
Settings
Idle speed, rpm:
AEE	640-790
135M, 136M	765-815
135V, 136V	750-850
CO content	less than 0.5%
Fast idle speed, rpm	2500-2800
Value of l per rev. 2500-2800 rpm	0.97-1.03
CO content at 2500-2800 rpm	less than 0.3%
Speed when checking the control circuit, rpm:
AEE	540-890
135M, 136M	665-915
135V, 136V	600-1000
Ignition system
Spark plug type and gap size (mm)
1.3L models:
Engine 135 SPFI, Champion RC12YC	0.8
Engine 136 SPFI, Champion RC9YC	0.8
MPFI, Champion RN8VTYC4 Not subject to adjustment
*The value of the interelectrode gap is given based on the requirements of the Champion company. When installing spark plugs from other manufacturers, follow the recommendations of the latter.
Braking mechanisms
Minimum permissible thickness of friction linings, mm
Front brake pads	2.0
Rear brake shoes	2.5
Tightening forces of threaded connections	Nm
Air Cleaner Upper Cover Bolts - 1.3L SPFI Models	10
Coolant Drain Plugs - 1.3L Engines:
Coolant tract tube drain plug	20
Cylinder Block Drain Plug	25
Ignition coil mounting bolts	10
Wheel mounting bolts	110
Cylinder head cover fastening nuts	3
Spark plugs:
With flat seat and sealing washer	30
With cone seat and without sealing washer	15
Speedometer Drive Mounting Plate Bolt	10
Oil deflector plate/rocker shaft mounting bolt	30
Oil pan drain plug:
Engine 1.3 l	65
Engine 1.6 l	30
Lower timing belt cover mounting bolts (are subject to mandatory replacement)	10
Transmission case drain plug	35
Valve adjuster locknuts	18
Diesel models
Volumes of working fluids
Engine oil (including oil filter), l	5.0
The amount of oil required to raise its level from the MIN mark to the MAX mark on the dipstick, l	1.0
Engine coolant, l (approximately)	6.0
Transmission oil, l (approximately)	2.4
Windscreen washer fluid reservoir capacity, l
Models without headlamp washers	3.0
Models with headlamp washers	8.0
Fuel tank capacity, l	42
Engine
Oil filter:	Champion C125
Cooling system
Coolant:
50% antifreeze	Frost resistance up to -37°C
55% antifreeze	Frost resistance up to -45°C

Power supply system
Air cleaner filter element:
Champion U582
Fuel filter	Champion L114
Settings
Idle speed, rpm	850-1000
Maximum speed, rpm	4950-5150
Preheat system
Glow plug type	Champion CH160
Braking mechanisms
Minimum permissible thickness of friction linings, mm
Front brake pads	2.0
Rear brake shoes	2.5
Tightening forces of threaded connections	Nm
Cooling system drain plug	20
Wheel mounting bolts	110
Speedometer Drive Assembly Mounting Plate Bolt	10
Transmission case drain plug	35