Removal and repair of car engines Skoda Felicia

Removal the power unit from the vehicle
Right suspension support for 1.3L petrol engine 1 - Bracket; 2 - Bolt; 3 - Bolt; 4 - Elastic sleeve Right suspension support for diesel engine and petrol engine 1.6 l 1 - Bracket; 2 - Pillow; 3 - Bracket; 4 - Bolt Left...

Removal, disassembly and installation of the power unit
Removal Note. The engine can only be removed from the vehicle together with the transmission. Disassembling the power unit for the purpose of carrying out a major overhaul of the engine can be done later on a workbench...

Engine Overhaul — Preliminary Information
The easiest way to disassemble the engine is to install it on a special mounting stand, which you can try to rent from a car service workshop. To install it on the stand, the flywheel is removed from the engine, after...

Disassembly, cleaning, inspection and assembly of the cylinder head
Note: In Skoda branded service centers, you can always order a restored head, which is often much more practical than spending time and effort on performing fairly complex procedures for checking and restoring the old...

Removal, inspection and installation of camshaft and valve lifters (1.3 l)
Removal 1. Remove the rocker arm shaft assembly. 2. Remove the pushrods one by one and store them in the order they were installed on the engine in a specially prepared box divided into sections. Note that the pushrods...

Removal and installation the intermediate shaft (diesel engine)
Removal 1. Remove the timing belt and intermediate shaft gear. 2. After measuring the longitudinal stroke of the shaft, evaluate its axial play. The dial gauge should be secured to the cylinder block coaxially with the...

Removal, inspection and installation of connecting rod and piston assemblies
Marking on the piston bottom 1 - Arrow indicating the direction of rotation of the crankshaft; 2 - Manufacturer's identification number; 3 - Release date; 4 - Manufacturer's trademark; 5 - Piston diameter (designated by...

Removal and checking the condition of the crankshaft
Crankshaft assembly - general information The crankshaft is forged from steel. The shaft has three main and four connecting rod journals. The cranks with connecting rod journals of the first and second cylinders are...

Cleaning and checking the condition of the cylinder block/engine crankcase
Cleaning 1. Remove all attachments and components from the unit, as well as electrical sensors and switches. For a complete cleaning, it is also necessary to remove the squeeze plugs of the water galleries - drill small...

Checking and selecting liners of main and connecting rod bearings of the crankshaft
Typical examples of crankshaft bearing shell wear A - Scratched by foreign particles - grains are visible, embedded in the working layer of the liner; B - Lack of oil - top layer is worn off; C - The inserts are...

The procedure for assembling the engine after a major overhaul
Before starting assembly, make sure you have all the necessary replacement components, tools, and materials. Read the procedure description carefully and be prepared to perform the work. Among other equipment, you will...

Installing the crankshaft and checking the main bearing clearances
Engine 1.3 l Determination of the working clearance of main bearings 1. Wipe the backs of the selected liners and their beds in the cylinder block and bearing caps. 2. Insert the inserts into their beds, making sure...

Installing piston rings
1. Make sure that the pistons are seated correctly on their connecting rods and the piston rings are in their grooves (see section Removal, condition check and installation of connecting rod and piston assemblies ). 2....

Installing connecting rod and piston assemblies and checking connecting rod bearing clearances
Engine 1.3 l Checking the working clearances of bearings 1. When installing a machined crankshaft complete with original liners manufactured by Skoda, the need for the checks described below disappears. 2. Checking the...

Initial engine start after completion of overhaul
In accordance with the instructions set out in Section The procedure for assembling the engine after a major overhaul , install the remaining components on the engine, assemble the power unit and install it on the...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Link to this section in various formats

TEXTHTMLBB Code

Felicia (1994-2001)