Evaporative Emission System Exhaust emission control systems All gasoline models must be fueled with unleaded fuel only. The engine management system performs general control over the functioning of the power unit, ensuring the optimal ratio...
Crankcase ventilation system — general information General information The fuel vapor recovery system consists of a purge valve, a canister filled with activated carbon and connecting hoses. The purge valve is mounted in a bracket on the rear of the left wheel arch...
Removal and installation of λ-probe 1. The system consists of a set of rubber hoses connecting the crankcase ventilation breathers and the cylinder head cover (depending on vehicle configuration) and air cleaner. 2. On 1.6 liter models, the system also...
Exhaust gas recirculation system (EGR) Removing 1. The oxygen sensor is screwed into the downpipe of the exhaust system ahead of the catalytic converter. 2. Disconnect the negative cable from the battery. 3. Disconnect the l-probe wiring connector. The...
Removal and installation of a final collector EGR valve installation components 1 - Inlet pipeline; 2 - Gasket; 3 - EGR valve; 4 - Mounting clamp; 5 - Coupling screw; 6 - Connecting tube; 7 - Exhaust manifold; 8 - Fixing nut General information The system consists...
Catalytic Converter — Information and Precautions The catalytic converter is a highly reliable, simple design device that itself does not require any maintenance. However, readers should pay attention to some important points. Petrol models a) In no case do not fill...
Exhaust system — general information and component replacement Components of the front section of the exhaust system 1 - Sealing gasket; 2 - Exhaust manifold; 3 - Casing of the intake air heater; 4 - Nut; 5 - Sealing gasket; 6 - Nut; 7 - Downpipe (fuel injected models); 8 - O-ring;...