Removing
1. Set the front seat to the most forward position using the adjusters.
2. Unscrew the rear mounting screws (1) And (3), shown in the figure below.
3. Move the front seat to its rearmost position using the adjusters as shown in the figure below.
4. Unscrew the front fixing screws (2) And (4) front seat as shown in the figure below.
5. To take a forward seat from inside of the car in gathering.
Attention. To avoid damage to the seat position adjustment lever, its finishing materials, seat belt buckle, when removing the seat from the car, be extremely careful.
Installation
1. Install the seat assembly in the car interior. Align the seat supports with the holes in the bottom of the vehicle using the dowel pin (5), shown in the figure below.
2. Move the front seat to the rearmost position using the adjuster.
3. Install and tighten the front fixing screw (4), shown in the figure below, from the side of the central tunnel. Mounting screw tightening torque during installation: 40 Nm.
4. Install and tighten the front mounting screw (2), shown in the figure below, from the side of the doorway. Mounting screw tightening torque during installation: 40 Nm.
5. Move the front seat to the most forward position using the adjuster.
6. Install and tighten the rear mounting screw (3), shown in the figure below, from the side of the central tunnel. Mounting screw tightening torque during installation: 40 Nm.
7. Install and tighten the rear mounting screw (1), shown in the figure below, from the side of the door opening Tightening torque of the fixing screw during installation: 40 Nm.