Warning! Risk of damage to the flywheel. Unscrew bolts "B" only with a hand tool. Do not use pneumatic or impact wrenches. When unscrewing bolts, make sure that their heads do not touch the flywheel. Turn flywheel "A" so that bolts "B" are positioned in the center of the holes "arrows".
Insert the stop -MP1-223 (3067)- into the hole on the cylinder block -pos. B-, loosen the flywheel bolts. Unscrew the bolts and remove the flywheel.
Installation
Installation in reverse order.
Note: Replace screws that are tightened to the specified angle.
Insert the stop -MP1-223 (3067)- into the hole on the cylinder block -pos. A-.
