Remove the top dead center spring or top dead center spring from the bracket.
Remove the clutch pedal support pin: -1- - Allen key (SW14). Turn the clutch pedal bearing pin in direction -arrow- to the left.
In this case, the clamps -A- are destroyed. The projections -B- are arranged horizontally. Move the clutch pedal a little to remove the support pin.
Installation
Installation in reverse order. -1- - Hex socket wrench (SW 14). After dismantling, replace the bearing pin. Slightly depress the clutch pedal to insert the support pin. The lugs -A- must be horizontal. Turn bearing pin to the right in direction of -arrow-. Locks B- must click into place distinctly. The tabs -A- will be in a vertical position. Install the top dead center spring or top dead center spring on the bracket.
All
If fitted, install bracket -arrow- together with parking pilot control unit -J446-. Connect battery.