 |
 |
Remove lock washers -2 and 3- (lock washers -1 and 4- are now missing), the gearshift drive cable and the gear selector cable should be picked up and removed from the gearshift lever, if necessary, with the selector lever, for example, with a screwdriver. Remove the gearshift drive cable and gear selector cable from the gearshift housing. Unlock the arresters "A" for the gearshift drive cable and the gear selection cable as follows: press the movable sleeve forward until it stops "see arrow 1". Turn the movable sleeve to the right until it stops "see arrow 2" so that it locks in place. Remove the drive cable arresters.
Remove lock washers "1" and "2". Remove the drive cable counter supports.
Installation in reverse order. Secure the gear shift cable and gear selector cable to the gear shift housing with lock washers -2 and 3-. Press the gear shift cable and gear selector cable onto the gear shift lever and selector lever in the gear shift housing (lock washers -1 and 4- are now missing). Secure the seal and the shift pad by pressing the "see arrows" tabs. Set the switching mechanism.
(The original article is available on: www.skodabook.ru)