Contents: Removal ⬇ Installation ⬇
Removal
1. Unscrew the mounting screws (6) and remove the door opening lever (5), shown in the figure below. The tightening torque of the mounting screws during installation is 2.5 Nm.
2. Remove the rear window wiper motor cover.
3. Disconnect the retaining clips one by one.
The original article can be found on the resource (SKODABOOK)
4. Remove the tailgate trim panel assembly as shown in the figure below.
Installation
Installation is carried out in the reverse order of removal.
Note: Before installing the trim panel, it is necessary to check all fastening elements and, if necessary, replace these elements with new ones.