Removing
1. Remove the rear seat cushion assembly (for details, see the relevant section in this chapter).
2. To remove the panel of facing of the central rack of a body.
3. Carefully detach the fixing clips (2) from the supports on the body, as shown in the figure below.
4. Remove the wheel arch trim panel inside the passenger compartment (1) assembled as shown in the figure below.
Installation
Installation is carried out in the reverse order of removal.
Note. Before installing the cladding panel, it is necessary to check all fastening elements and, if necessary, replace these elements with new ones.
Note. After installing the fascia panel, it is necessary to check and make sure that the fascia panel is securely fixed to the tailgate seals.