Interior (interior elements of the cabin) Skoda Fabia 2
Interior rearview mirror
Turn the interior rearview mirror "2" by 90° "arrow B" and remove it from the mirror holder. Installation The interior rearview mirror should be placed on the holder and turned in the direction of arrow A by 90°.
Turn the interior rearview mirror "2" by 90° "arrow B" and remove it from the mirror holder. Installation The interior rearview mirror should be placed on the holder and turned in the direction of arrow A by 90°.
Lids, storage areas, canopies
Assembly diagram of the middle panel (protruding part of the floor between the front seats) 1 - Middle panel (protruding part of the floor between the front seats) Remove the gear shift boot. Remove the cover of the...
Assembly diagram of the middle panel (protruding part of the floor between the front seats) 1 - Middle panel (protruding part of the floor between the front seats) Remove the gear shift boot. Remove the cover of the...
Ceiling handrail
Fold down grab handle "3." Using a thin screwdriver as a lever, release and fold back blind covers "2." Remove grab handle "3" by unscrewing screws "1" (3 Nm). Reinstallation should be performed in reverse order.
Fold down grab handle "3." Using a thin screwdriver as a lever, release and fold back blind covers "2." Remove grab handle "3" by unscrewing screws "1" (3 Nm). Reinstallation should be performed in reverse order.
Seat belts
Front seat belts - assembly diagram 1 -22 Nm 2 - Sliding upper seat belt anchor mechanism Remove the upper panel (upholstery) of the B-pillar. After removing the screw (pos. 4), remove the upper seat belt mounting loop...
Front seat belts - assembly diagram 1 -22 Nm 2 - Sliding upper seat belt anchor mechanism Remove the upper panel (upholstery) of the B-pillar. After removing the screw (pos. 4), remove the upper seat belt mounting loop...
«Airbag» inflatable airbags
System overview "Airbag" 1 - Indicator for the "Airbag" system; 2 - "Airbag" module for the driver; 3 - Airbag system deactivation indicator for front seat passenger; 4 - Airbag module for front passenger; 5 - Airbag...
System overview "Airbag" 1 - Indicator for the "Airbag" system; 2 - "Airbag" module for the driver; 3 - Airbag system deactivation indicator for front seat passenger; 4 - Airbag module for front passenger; 5 - Airbag...
Removal and installation the driver's airbag module
Disconnect the wire connecting the battery terminal to the ground (body) of the vehicle. Tilt the steering wheel to its lowest position. Pull the steering wheel out completely to the extreme position. Turn the steering...
Disconnect the wire connecting the battery terminal to the ground (body) of the vehicle. Tilt the steering wheel to its lowest position. Pull the steering wheel out completely to the extreme position. Turn the steering...
Dashboard
Removal and installation the instrument panel Remove the steering wheel. Remove the upper panels (upholstery) of the A-pillar. Remove the upper casing of the steering shaft "1". Press the instrument cluster housing "1"...
Removal and installation the instrument panel Remove the steering wheel. Remove the upper panels (upholstery) of the A-pillar. Remove the upper casing of the steering shaft "1". Press the instrument cluster housing "1"...
Door moldings
Removal and installation the driver's door molding 1 - Front door molding Using a lever action, remove the cover of the door pull handle "5" from the bottom upwards. Remove the mounting screws for the molding "7"....
Removal and installation the driver's door molding 1 - Front door molding Using a lever action, remove the cover of the door pull handle "5" from the bottom upwards. Remove the mounting screws for the molding "7"....
Upholstery and panels
Removal and installation the upper panel (upholstery) of the A-pillar (vehicles without an inflatable airbag for head protection) Using a lever action, release the top panel (upholstery) of the A-pillar "2" from the...
Removal and installation the upper panel (upholstery) of the A-pillar (vehicles without an inflatable airbag for head protection) Using a lever action, release the top panel (upholstery) of the A-pillar "2" from the...
Trunk lining
Removal and installation the trunk side panel Remove the trunk sill cover. Remove the rear seat back. Remove the upper panel (upholstery) of the C-pillar. Remove screws "4" (0.8 Nm). Using a lever motion, remove the...
Removal and installation the trunk side panel Remove the trunk sill cover. Remove the rear seat back. Remove the upper panel (upholstery) of the C-pillar. Remove screws "4" (0.8 Nm). Using a lever motion, remove the...
Front seats
Removal and installation front seats For vehicles with side "Airbag" airbags Move seat "1" as far forward as possible. Remove the rear support screws "2" (24 Nm). Move the seat "1" as far back as possible. Remove the...
Removal and installation front seats For vehicles with side "Airbag" airbags Move seat "1" as far forward as possible. Remove the rear support screws "2" (24 Nm). Move the seat "1" as far back as possible. Remove the...
Rear seats
Removal and installation the seat base (cushion) Pull the seat cushion forward and upward, folding it back. Press hooks "1" out of loops "2" and remove the seat cushion from the vehicle. Installation should be carried...
Removal and installation the seat base (cushion) Pull the seat cushion forward and upward, folding it back. Press hooks "1" out of loops "2" and remove the seat cushion from the vehicle. Installation should be carried...
Front seat covers and upholstery
Important: Removal of the upholstery is carried out with the seat removed. Assembly diagram of the cover and backrest upholstery 1 - Headrest guide bushings By pressing the locking fastener "arrow", for example with a...
Important: Removal of the upholstery is carried out with the seat removed. Assembly diagram of the cover and backrest upholstery 1 - Headrest guide bushings By pressing the locking fastener "arrow", for example with a...
Rear seat covers and upholstery
Assembly diagram of the rear seat upholstery and back cushions ; 1 - Headrest; 2 - Thrust; 3 - Guide. Using a thin screwdriver, press the pawl and remove the guide.; 4 - Bushing; 5 - Guide; 6 - Foam plastic padding....
Assembly diagram of the rear seat upholstery and back cushions ; 1 - Headrest; 2 - Thrust; 3 - Guide. Using a thin screwdriver, press the pawl and remove the guide.; 4 - Bushing; 5 - Guide; 6 - Foam plastic padding....
This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
Read similar sections on other Skoda models
➧ Body and interior: Interior (internal elements) Skoda Rapid 1 (2012-2022)
➧ Body and interior: Interior (internal elements) Skoda Octavia 3 (2013-2019)
➧ Body and interior: Interior (internal elements) Skoda Superb 2 (2008-2015)
➧ Body and interior: Interior (internal elements) Skoda Kodiaq 1 (2016-2024)
➧ Body and interior: Interior (internal elements) Skoda Yeti (2009-2017)
➧ Body and interior: Interior (salon) Skoda Felicia (1994-2001)
Link to this section in various formats
TEXTHTMLBB Code
- General information
- User manual
- Maintenance
- Petrol engines 1.2 l
- Engine repair
- Cooling and lubrication system
- Power and control system
- Petrol engines 1.4 l
- Engine repair
- Cooling and lubrication system
- Power and control system
- Petrol engines 1.6 l
- Engine repair
- Cooling and lubrication system
- Power and control system
- Diesel engines 1.4 l
- Engine repair
- Cooling and lubrication system
- Power and control system
- Diesel engines 1.9 l
- Engine repair
- Cooling and lubrication system
- Power and control system
- Transmission
- Manual gearbox 02R
- Manual gearbox 02T
- Automatic gearbox 09G
- Cardan shaft
- Chassis (running gear)
- Front suspension
- Rear suspension
- Wheels and tires
- Brake system
- Steering system
- Body and interior
- Exterior (external elements)
- Interior (internal elements)
- Heating and air conditioning
- Electrical equipment
- Equipment and devices
- Headlights and lighting
- Power devices
- Electrical circuits
- User manual
- Introduction to manual
- Governing bodies
- Salon equipment
- Driving and maintenance
- Power unit
- Engine repair
- Lubrication system
- Supply system
- Cooling system
- Exhaust system
- Transmission
- Mechanical gearbox 002
- Mechanical gearbox 02T
- Chassis (running gear)
- Front suspension
- Rear suspension
- Steering
- Steering gear without power
- Power steering
- Brake system
- Body and interior
- Body and interior repair
- Interior heating
- Electrical equipment
- Equipment and devices
- Ignition system
- Windshield wipers
- Electrical circuits
