System type
Engine codes 135V and 136V - Bosch Mono-Motronic
Fuel System Data
Type of fuel priming pump - Electric, immersed in the fuel tank
The injection rate of the fuel priming pump is 1000 cm33/min (at a battery voltage of 12.5 volts)
Regulated fuel pressure - 0.8-1.2 bar
Engine idle speed - 750-800 rpm (not adjustable, electronically controlled)
Maximum engine speed - 5800 rpm (electronically controlled)
The electrical resistance of the nozzle is 3.0 Ohm at 15-30°С
Recommended fuel
Minimum Octane - Unleaded 95 RON
Tightening torques, Nm
Air cleaner housing nuts/bolts - 10
Fixing ring of the fuel priming pump unit / fuel gauge sensor - 75
Fuel tank mounting bolts - 25
Nozzle cap/inlet air temperature sensor housing screw - 5
Nuts of fastening of an inlet collector — 25
Nuts of fastening of a flange of the case of a throttle to an inlet manifold — 10
Throttle Positioner Screws - 6