Disconnect connector -3- from igniter. To do this, unlock catch -4- with a small screwdriver -arrow- and unplug connector.
Carefully! Lay the airbag module soft side up.
Installation
Connect connector -1- to airbag igniter -arrow a-. Press the latch -2-arrow B-, while the connector is brought to the stop and at the same time is fixed in the squib.
Installation in reverse order. Turn on the ignition. Connect battery terminals.
Attention! Any risk of mechanical damage to the surface of the leg airbag must be excluded. After finishing work, inspect the surface of the leg airbag for damage.