1. Nuts, 25 Nm
2. Pedal mechanism
3. Front wall
4. Nut, self-locking, 23 Nm: replace after each removal
5. Master brake cylinder: cannot be repaired; if faulty, replace completely
6. Brake light switch "F": Installation location: on the brake master cylinder
7. Bolt, 8 Nm
8. Brake line, 14 Nm: from brake master cylinder/floating piston circuit to hydraulic unit
9. Brake line, 14 Nm: from brake master cylinder/piston tappet circuit to hydraulic unit
[View the original on the website: SKODABOOK]
10. Plug; moisten with brake fluid, install in the brake cylinder and press on the hydraulic brake reservoir
11. Brake fluid level signal contact "F34"
12. Hydraulic brake fluid reservoir
13. Vacuum hose
14. Lid
15. Seal: for brake booster
16. Seal
17. Brake booster. Functional check: Press the brake pedal hard several times with the engine off (thus, a vacuum is created in the system). Now hold the brake pedal with medium force in the braking position and start the engine. If the brake booster is functioning properly, there is now a noticeable force on the brake pedal (the amplifier is working); if faulty, replace completely
18. Seal; replace after each removal; the seal is glued only during production; remove glue residue; do not stick in the future