Contents: Removal ⬇ Installation ⬇
Removal
1. Remove the air cleaner housing (see section Removal and installation the air cleaner assembly).
2. Disconnect the remaining vacuum tube from the vacuum switch(going to the vacuum capsule of the valve-switch housing). Try to find the route for laying the tube.
3. Using a small flat-head screwdriver, pry the support plate off the underside of the vacuum switch. The plate may be quite tight, so be very careful not to damage the nipples.
4. Remove the vacuum switch from the air cleaner housing. Remove the gasket.
Installation
Installation is carried out in the reverse order. Any damaged gasket during assembly must be replaced. Check the tightness of the support plate on the nipples.