1. Attachment drive belt; 2. Attachment drive belt tensioner; 3. Fastening bolt, tightening torque 8 Nm + 450; 4. Fastening bolt, tightening torque 150 Nm + 90 degrees; 5. Sealing ring; 6. Crankshaft pulley (vibration damper); 7. Attachment mounting bracket; 8. Seal; 9. Mounting bolt; 10. Mounting bolt; 11. Generator assembly; 12. Guide pins; 13. Air conditioning compressor; 14. Mounting bolt
Attachment bracket fastener tightening sequence
Install the attachment bracket and first screw in the bolt (4) as shown in the figure below.
Tighten the bolts in sequence 1 through 5 in 3 stages:
- 1. Tighten the bolts by hand.
- 2. Tighten the bolts to 20 Nm.
- 3. Tighten the bolts 90° (1/4 turn).
