2. Pusher
3. Retaining tabs
Fit release tool -T10159A- and pull towards driver's seat while holding brake pedal from turning (the pedal should not move back at this moment). As a result, the retaining lugs -3- of the fasteners are pushed away from the pusher ball head -2-. For better clarity, the figure shows the disconnection of the brake pedal from the brake booster with the pedal mechanism removed. Now pull release tool -T10159A- and brake pedal together towards driver's seat. (The brake pedal is then removed from the ball head of the pusher.)
Connecting the brake pedal to the brake booster with clamps
Hold the ball head of the tappet in front of the fastening in the brake pedal and press the brake pedal in the direction of the arrow towards the brake booster until the ball head audibly engages in the fastening. Installation in reverse order.