| Front wheel brakes | |
| Type | Disc Girling |
| Ø Caliper cylinder, mm | 45 |
| Piston Ø, mm | 54 |
| Brake disc thickness, mm | |
| New disk | 12.9 |
| Maximum permissible value | 11.4 |
| Maximum allowable lateral runout of the disc, mm | 0.1 |
| Minimum permissible thickness of brake shoe friction linings, mm | 2.0 |
| Friction lining area, cm² | 150 |
| Rear wheel brakes | |
| Type | Drum self-aligning |
| Ø Wheel cylinder, mm | 19 |
| Inner diameter of brake drum, mm | |
| New drum | 200 |
| Maximum permissible value | 201 |
| Minimum permissible thickness of brake shoe friction linings, mm | 2.5 |
| Friction lining area, cm² | 224 |
| Parking brake actuator | Mechanical, cable |
| Master brake cylinder (MBC) | |
| Inner Ø, mm | 22.2 |
| Vacuum brake booster | |
| Inner Ø, mm | 217 |
| Tightening forces of threaded connections | Nm |
| ABS Wheel Sensor Mounting Bolt | 10 |
| Disc mounting screw | 8 |
| Front brake caliper: | |
| Guide pin bolts | 35 |
| Mounting bolts | 60 |
| Load Change Correction Valve Axle Bolt Nut | 20 |
| Master cylinder mounting nuts | 20÷25 |
| Wheel mounting bolts | 110 |
| Vacuum valve tightening bolt (diesel models) | 20 |
| Brake booster servo unit mounting nuts | 20 |
Article published on the website [SKODABOOK]