Note:
- Depending on the modification, bumpers may differ.
- The bumper is removed together with the radiator grille.
- The wheel arch panel only needs to be detached from the mounting elements. Complete removal is not required.
1. Remove the logo.
2. Remove the adaptive cruise control module (if provided by the package).
3. Unscrew the mounting screws (1).
4. Unscrew the mounting screws (2).
5. Unscrew the mounting screws (4) as shown in the figure below.
6. Disconnect the front bumper panel from the right and left guides on the fenders under the headlights.
7. Remove the front bumper assembly (3) by pulling it towards you, using the help of a second mechanic.
8. Disconnect the wiring harness connectors.
9. Disconnect the windshield washer hoses.
Installation
Installation is performed in the reverse order of removal.