Lubricating the Distributor — 1.3L Models (Skoda Felicia)

1. Remove the locking screw from the distributor housing.

2. Add a couple of drops of engine oil into the opened hole.

3. In case of performing the procedure in situ (without removing the distributor), try to avoid getting oil on the accessory drive belt.

4. Finally, screw in and tighten the locking screw.

This article is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Article verified: Ekaterina Blinova

◀ Previous

Skoda Felicia: Maintenance (petrol)

Next ►

Checking the Timing Belt Condition — 1.6L Models
Replacing Spark Plugs — 1.3L Models
Replacing the air cleaner filter element
Car road tests
Checking windshield wipers/washers/headlight lenses

Checking the condition of the auxiliary drive belt
Checking the airbag system
Checking emission control systems
Checking the condition of the shoes and drums of the rear brake mechanisms
Checking body panels for signs of corrosion development

Read similar articles on other Skoda models