Rear suspension of car Skoda Fabia 2

Rear suspension — raising the wheel installation to the unloaded position (vehicle curb weight)
Important: Screws on chassis parts with rubber-metal bearings must always be tightened in the unloaded position (curb weight of the vehicle). Curb weight Weight of the vehicle with a full fuel tank, a full windshield...

Rear suspension with drum brakes
Assembly diagram of the rear suspension with a drum brake mechanism Important: Welding and straightening work on the axle beam and axle stub (journal) is not permitted. Self-locking bolts and nuts must always be...

Removal and installation the rear suspension with drum brakes
Important: Screws on chassis parts with rubber-metal bearings must always be tightened in the unloaded position (curb weight of the vehicle) - the car is not loaded. Release the parking brake lever. Remove the storage...

Repair of rear suspension with drum brakes
Shock absorber assembly diagram 1 - The shock absorber may need to be replaced separately; 2 - Corrugated cover (cuff); 3 - Safety tube; 4 - Rubber buffer; 5 - Shock absorber support; 6 - Nut, self-locking, 25 Nm,...

Removal and installation the shock absorber
Important: It is not necessary to remove the coil spring to remove the shock absorber. Before you start work, you should know the size "a". After removing the wheel, lift the car. Remove the rear wheel arch (fender)...

Removal and installation a coil spring
Important: To remove the left spring, it is necessary to partially remove the rear exhaust silencer due to insufficient space for the coil spring compressor. Raise the car. Partially remove (unhook) the rear exhaust...

Removal and installation rubber-metal support
Important: The rubber-metal support can only be replaced with the rear suspension lowered. Before you start work, you should know the size "a". After removing the wheels, lift the car. Disconnect the parking brake...

Wheel installation repair — drum brake mechanism
Wheel assembly diagram - drum brake mechanism 1 - Phillips head screw, 4 Nm; 2 - Brake drum; 3 - Cap, replace after each removal; 4 - Twelve-sided nut, self-locking, 70 Nm +30°, replace after each removal; 5 - Wheel hub...

Removal and installation a wheel hub with a wheel hub bearing — drum brake mechanism
Remove the rear wheel. Release the brakes (set the brakes to their original position). Move the wedge (self-adjusting state of the parking brake lever) through the hole for the wheel mounting bolt in the brake drum...

Removal and installation the axle journal (neck) — drum brake mechanism
Important: Straightening work on the axle stub (journal) is not permitted. Cleaning the threads of the axle journal (neck) with a tap is not permitted. Remove the wheel hub with the wheel hub bearing. Remove the brake...

Rear suspension with disc brakes
Assembly diagram of the rear suspension with disc brake mechanism Important: Welding and straightening work on the axle beam and axle stub (journal) is not permitted. Self-locking bolts and nuts must always be replaced....

Removal and installation the rear suspension with disc brakes
Important: Screws on chassis parts with rubber-metal bearings must always be tightened in the unloaded position (curb weight of the vehicle) - the car is not loaded. Before you start work, you should know the size "a"....

Repair of rear suspension with disc brakes
Shock absorber assembly diagram 1 - The shock absorber may need to be replaced separately; 2 - Corrugated cover (cuff); 3 - Safety tube; 4 - Rubber buffer; 5 - Shock absorber support; 6 - Nut, self-locking, 25 Nm,...

Wheel installation repair — disc brake mechanism
Wheel assembly diagram - disc brake mechanism 1 - Phillips head screw, 4 Nm; 2 - Brake disc; 3 - Cap, replace after each removal; 4 - Twelve-sided nut, self-locking, 70 Nm +30°, replace after each removal; 5 - Wheel hub...

Removal and installation a wheel hub with a wheel hub bearing — disc brake mechanism
Remove the rear wheel. Release the cap from the seat (attachment points) with light blows on the lid puller. Remove the cap. After unscrewing screws "A", remove the disc brake caliper and hang it up, for example. using...

Removal and installation the axle journal (neck) of the disc brake mechanism
Important: Straightening work on the axle stub (journal) is not permitted. Cleaning the threads of the axle journal (neck) with a tap is not permitted. Remove the wheel hub with the wheel hub bearing. Unscrew bolts...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Read similar sections on other Skoda models

➧ Chassis (running gear): Rear suspension Skoda Rapid 1 (2012-2022)
➧ Chassis (running gear): Rear suspension Skoda Octavia 3 (2013-2019)
➧ Chassis (running gear): Rear suspension Skoda Superb 2 (2008-2015)
➧ Chassis (running gear): Rear suspension Skoda Kodiaq 1 (2016-2024)
➧ Chassis (running gear): Rear suspension Skoda Yeti (2009-2017)

Link to this section in various formats

TEXTHTMLBB Code

Fabia 2 (2007-2014)