1.2-liter petrol engines of car Skoda Fabia 2

Engine code and number
Engine number The engine number ("engine code letter" and "serial number") is located at the front left side of the engine block on the separation (joint) seam between the engine and gearbox "arrow B". The "engine code...

Automatic control (self-diagnosis), safety measures, rules for maintaining cleanliness, notes
Safety precautions when working on the power supply system When performing any assembly work, especially in the engine compartment due to lack of space, please observe the following rules. Any kind of (pipe) wiring...

Removal and installation the engine
Important: The engine is removed together with the gearbox in a downward direction. Support points for lifting the Fabia II. Ensure the correct alignment of the connectors, marking them as necessary. After disconnecting...

Removal and installation a poly V-belt
Assembly diagram for cars with air conditioning Important: Before you begin removing the poly V-belt, you must mark its direction of movement. Reversing the direction of movement of a used belt can cause it to become...

Disassembling and assembling the engine
Distribution drive - assembly diagram Caution: Do not disassemble the lower part of the block and the upper part of the cylinder block. For engines with the letter designation BBM For engines with the letter designation...

Removal and installation the timing gear cover
Engine in a car. After installing the suspension device, slightly pre-tension the engine with the gearbox using the lead screw. Remove the poly V-belt. Remove the right engine mount. Remove the water coolant pump...

Control of time distribution regulation
Control of time distribution regulation For engines with the letter designation BBM Important: The crankshaft is at TDC of the piston of the 1st cylinder for ignition of the mixture only if the camshaft is at TDC of the...

Removal and installation the camshaft timing sprocket
For engines with the letter designation BBM Removal the camshaft timing sprocket Lock the camshaft and crankshaft at TDC of the 1st cylinder. Remove the timing gear cover. Lock the camshaft drive chain tensioner. The...

Replacing the crankshaft oil seal seal ring on the pulley side
Remove the poly V-belt. Remove the crankshaft pulley and bushing. Carefully remove the oil seal using screwdriver "A". Important: When removing the oil seal, do not damage the sealing surface. Stop Important: The...

Removal and installation the cylinder head
Assembly diagram For engines with the letter designation BBM BBM engine 1 - Cylinder block with cover, after replacement, change the entire filling volume of coolant; 2 - Seal; 3 - Cork; 4 - 20 Nm; 5 - Eye - left; 6 -...

Repair of the valve timing mechanism
Important: After completing work on the valve timing mechanism, carefully crank the engine at least 2 revolutions to ensure that none of the valves will touch the piston crown during starting. Assembly diagram For...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Read similar sections on other Skoda models

➧ Petrol engines 1.8/2.0 l: Engine repair Skoda Octavia 3 (2013-2019)
➧ Power unit: Engine in car Skoda Favorit (1987-1994)

Link to this section in various formats

TEXTHTMLBB Code

Fabia 2 (2007-2014)