Checking the front brake pads, caliper and disc (Skoda Favorit)

11. Jack up the front of the vehicle and support it securely on axle stands, then remove the wheel.

12. You can quickly check the thickness of the brake pad through the groove in the caliper (photo). If the brake pad of any pad is worn to the specified Specifications thickness or stronger, all four pads must be replaced.

13. For a complete check, the brake pads must be removed and cleaned. You can check the functioning of the caliper and the condition of the brake disc (Section 9).

Information published on the website www.SKODABOOK.ru

This article is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Article verified: Eleonora Afanasyeva

◀ Previous

Skoda Favorit: Maintenance

Next ►

Checking hydraulic tubes and hoses
Checking the vacuum booster unit
Replacing brake fluid
Measuring the brake fluid level
Checking the protective cover and the CV joint of the drive shaft

Checking the pads, slave cylinder and rear brake drum
Checking and adjusting the handbrake
Checking the front suspension and steering gear
Checking and adjusting the rear hub bearing
Checking the shock absorber/suspension strut

Read similar articles on other Skoda models