Rear bumper installation components
1 - Bumper; 2 - Plug; 3 - Nut; 4 - Washer; 5 - Washer; 6 - Nut; 7 - Overlay; 8 - Towing eye cover
Typical rear bumper installation components are shown in the illustration.
Removing
1. Open the tailgate. Prying off, remove the decorative caps and give the upper nuts of the rear bumper. Remove washers.
2. If necessary, chock the front wheels for better access, then jack up the rear of the vehicle and support it on jack stands.
3. Under the car give lateral fixing nuts, and also nuts of fastening of the basis of a bumper to a car body. There is no need for the final removal of the nuts, since the mounting holes are oval in shape.
4. With the help of an assistant, release the ends of the bumper from the side supports and remove the assembly from the vehicle.
Installation
Installation is in the reverse order. Track reliability of a tightening of fixture.