Disconnect the wire connecting the battery terminal to the vehicle ground (body) "6" (6 Nm). Fold back the positive terminal cover "1" and covers "2", "3", and "4". Press the retaining tabs "arrows" to remove cover "5" of the fuse holder.
Unscrew nut "1" (6 Nm). Remove additional wire "2" from the positive battery terminal.
Remove fuse links "2" from the fuse link holder. After unscrewing nuts "1" (6 Nm), remove the wires from the fuses.
Important: The number of wires, location of fuses and fuse links - bodyguards - depends on the vehicle equipment.
After unlocking the secondary protection, use a suitable object to remove the wires from the fuse holder "2".
Slide the fuse box on the battery "3" together with the fuse holder "2" in the "direction of the arrow" to the stop. Remove the fuse box on the battery "3" together with the fuse holder "2" from the retainer "4" by pulling upward.
Installation
The installation of the fuse box on the battery is carried out in the reverse order of actions. In this case, the following instructions must be observed. Ensure both the correct pin assignment of the connector of the fuse box on the battery and the fuse holder, and the correct fuse arrangement.