Contents: Tire installation ⬇ General information ⬇
Tire installation
To remove and install tires, the tool used must have a suitable mounting head for these wheel rims.
Caution: Otherwise, there is a risk of damage to the wheel. If the device you are using is not equipped with the appropriate head, you should contact the equipment manufacturer.
General information
For traffic safety, do not change tires individually, but at least together on one axle. Tires with a greater tread depth are always installed on the rear axle. It is recommended to install only tires of the same brand, design and the same tread pattern on all wheels. Only tires of the same brand, design, and tread pattern must be installed on one axle. When replacing a wheel rim or tire, a new valve should be installed. Tires are installed so that the "DOT" marking is on the outside of the wheel. For tires with a directional tread pattern, this only applies to the left side of the vehicle. In the case of a tire with a directional tread pattern, the right-hand side tire of the vehicle is used as a spare tire.
(Article reprinted from the website: «www.SkodaBook.ru»)