Front body parts
1 – engine compartment frame assembly; 2 – upper frame mounting bolt; 3 – side frame mounting bolt; 4 – radiator; 5 – radiator mounting bolt; 6 – buffer amplifier; 7 – amplifier mounting bolt
1. Disconnect the wire from the "-" terminal of the battery.
2. Disconnect the wire connectors from the headlights.
3. Disconnect the release cable from the hood latch.
4. Remove the front buffer.
5. Remove seven bolts 7 (see the figure Front body parts) fasteners and remove the 6 buffer amplifier.
6. Unscrew the radiator mounting bolts 5 and secure the radiator 4 to the body.
7. Unscrew one side 3 and one upper 2 bolt securing the frame 1 to both front fenders.
8. Remove engine bay frame 1 from the vehicle.
9. Install the engine compartment frame in reverse order. After installation, adjust the headlights.
Tightening torques, Nm
| Side frame mounting bolt to the front fender | 5 |
| Upper frame mounting bolt to front fender | 30 |
| Radiator mounting bolts to the frame | 50 |
| Buffer amplifier mounting bolts | 35 |
[Article reprinted from the website: www.skodabook.ru]