Contents: Removal and installation front and…⬇ Installation ⬇ Removal and installation the front…⬇ Removal and installation the rear…⬇ Removal and installation the CD…⬇
Removal and installation front and rear low frequency speakers
Remove the door moldings. Disconnect the plug connector on the speaker. After drilling out the four arrow rivets with a suitable drill, remove the faulty speaker.
Important: Remove any chips from the door to prevent corrosion. If the varnish is damaged while drilling out the rivets, the damaged areas need to be repaired.
Installation
Installation is carried out in the reverse order of actions. Attach the new speaker with suitable blind rivets.
Removal and installation the front tweeter
The front tweeters are firmly connected to the upper trim of the A-pillar.
The original article is available on: SKODABOOK.ru
Remove the upper trim of the front "A" pillar. Disconnect the speaker connector. Installation is carried out in the reverse order of actions.
Removal and installation the rear tweeter
Remove the rear door molding. Disconnect the speaker plug connector. Press the "arrow" latches outward and remove the speaker downwards.
Installation is carried out in the reverse order of actions.
Removal and installation the CD changer
The CD changer is located under the front passenger storage shelf.
Important: Before removing the CD changer, remove any remaining CDs from the unit.
Insert the "T10057" extraction tool into the holes as shown in the figure so that it clicks into the locked position. Remove the CD changer from the holder. Disconnect the plug connector.
Important: The extraction tool must not be pressed to the side or allowed to become tilted. To remove the eject tool, you must press the side locking tabs on the CD changer inward.
Installation is carried out in the reverse order of actions.