Rearview mirror assembly diagram
- 1 - Outside rearview mirror
Remove the door molding. Disconnect the rear view mirror connector (depending on the vehicle's equipment) (pos. 4). Remove the sound insulation (pos. 5). After removing the screws (pos. 6), remove the rearview mirror from the car. Installation should be carried out in the reverse order of actions.
- 2 - Rearview mirror frame
- 3 - Mirror glass
- 4 - Plug connector
- 5 - Soundproofing
- 6 - 9 Nm.
- 7 - Inner casing
- 8 - Retaining clamp
Removal the glass of the outside rearview mirror
- 1 - Upper casing
- 2 - Lower casing
- 3 - Mirror glass
Using a lever action, remove the frame (item 4). Using a lever action, remove the upper cover (item 1). After releasing the clamps on the back of the mirror glass, remove the glass. Disconnect the plug connectors for the heated mirror (depending on the vehicle's equipment) (pos. 5). Installation should be carried out in the reverse order of actions.
- 4 - Frame
- 5 - Electrical wiring. Only for vehicles with electric mirrors. Cars with manual steering have control rods instead of electrical wires and do not have heated mirrors.