Assembly diagram of the rear seat upholstery and back cushions
; 1 - Headrest; 2 - Thrust; 3 - Guide. Using a thin screwdriver, press the pawl and remove the guide.; 4 - Bushing; 5 - Guide; 6 - Foam plastic padding. Remove from the back wall.; 7 - Wire. Sewn into foam padding.; 8 - Upholstery. The upholstery is attached to the rear wall with clamping profile "7" and to the foam padding "4" using clamps "12".; 9 - Back wall; 10 - Clamping profile; 11 - Reinforcement. Sewn with upholstery "8". With holes for attaching clamps "12"; 12 - Bracket
Assembly diagram of the seat base cushion covers and upholstery
- 1 - Upholstery
Unhook clamp profile "3" from wire frame "7." After cutting through upholstery clips "5," remove the upholstery from the foam padding "6." Installation should be performed in reverse order.
- 2 - Reinforcement. Sewn with upholstery "1". With holes for attaching clamps "5".
- 3 - Clamping profile
- 4 - Wire. Sewn to the foam padding "6".
- 5 - Upholstery clamps
- 6 - Foam plastic padding
- 7 - Frame
- 8 - Hooks. For attaching the seat base.
[Data copied from the portal www.SKODABOOK.ru]