Contents: Installation ⬇ Tightening torques ⬇
After pressing the brake pedal, secure it with a brake pedal holding device. Place a catch pan under the brake force regulator to catch any leaking brake fluid. Mark the brake lines. Unscrew the brake lines "1", "2", "3" and "4" from the brake force regulator. Seal the brake lines to prevent contamination and leakage of brake fluid. Seal the connecting pipes of the brake drive pipes on the brake force regulator with plugs from the spare parts kit. Unscrew nut "5", remove screw "6". Unscrew countersunk head screw "7". Remove the brake force regulator.
Installation
Caution: Ensure that the brake line channels are correctly aligned. Mixing brake lines results in dangerous brake force adjustments.
Installation is carried out in the reverse order of actions. Bleed the brake system. Adjustment of the load-dependent brake force regulator.
Tightening torques
| Brake force regulator - holder | 20 Nm |
| Brake force regulator - spring | 20 Nm |
| Brake line - brake force regulator | 14 Nm |
(Article published on the website: «SkodaBook»)