Removal and installation the brake booster (Skoda Fabia 5J)

Contents: Cars without air conditioning ⬇ For cars with air conditioning ⬇ Continued for all vehicles ⬇ Installation ⬇ Cars without ABS and with ABS,…⬇ Cars with ABS/ASR/ESP BOSCH 8.0 ⬇ Continued for all vehicles ⬇ Tightening torques ⬇

Remove the engine cover. Remove the air filter. Remove the battery and battery holder. Cover the area around the engine and gearbox with a sufficient number of non-shedding rags. Disconnect the connector "1" from the brake fluid level warning switch "F34". Remove the suction hose "6" from the holder on the brake fluid reservoir. Pump out the brake fluid after opening the threaded plugs of the ventilation holes on the disc wheel mechanism calipers by pressing the brake pedal again. Disconnect the master cylinder wire from mount "2" using a tube clamp. Open the spring clamp on the master cylinder wire using pliers. After disconnecting the master cylinder wire mount "2" from the hydraulic brake reservoir "3", secure it at the top. Remove the brake lines from the holder "7". Unscrew the brake lines from the master cylinder "5" and plug them.

Seal the connecting pipes of the brake drive pipes on the brake master cylinder with plugs from the spare parts kit.

Cars without air conditioning

Remove the left footwell air duct nozzle.

For cars with air conditioning

Remove the left footwell air duct nozzle.

Vehicles with the "Comfort" system electrical equipment central control unit "J393"

Remove the central control unit for the electrical equipment of the "Comfort" system "J393".

Continued for all vehicles

Remove the brake light switch. Separate the brake control pedal from the brake booster. Unscrew nuts of brake booster "arrows". Pull brake booster with master cylinder forward.

Installation

Installation is carried out in the reverse order of actions. Install the brake control pedal onto the brake booster.

(Data Copied from the portal skodabook)

Adjust and install the brake light switch. Add new brake fluid. Install the battery and battery holder. Connect the battery.