Assembly diagram of the activated carbon tank system
Important: Hose connections are secured with spring clamps. To install spring clamps, it is recommended to use spring clamp pliers.
1 - Intake gas pipeline; 2 - Air bleed hose; 3 - Solenoid valve "N80", secured with a holder on the intake manifold, the valve is activated by clock pulses from the engine control unit; 4 - Air bleed hose; 5 - Ventilation line, from the solenoid valve "N80"; 6 - Vent line, from the gravity valve on the fuel tank; 7 - Activated carbon tank, assembly location: in the wheel arch of the right rear wheel, fixed to the body, filled from valve "N80" and from the gravity valve.; 8-10 Nm
Removal: remove the right rear wheel, remove the plastic wheel arch cover, disconnect pipes "5" and "6", remove screw "8", pull out the reservoir downwards. Installation is carried out in the reverse order of actions
Data Copied from the portal: SkodaBook