Contents: Drain ⬇ Refueling ⬇
Caution: When opening the expansion tank, hot steam or hot coolant may leak out. After covering the cork with a rag, carefully open it.
Drain
Open the cap of the coolant expansion tank. Remove the lower engine cover. Place a catch pan under the engine. Turn the drain plug "arrow" on the radiator to the left and pull it out in the backward direction; if necessary, attach an auxiliary hose to the fitting.
Also, remove the front coolant hose on the "arrow" oil radiator and drain any remaining coolant.
Refueling
Important: Replace O-rings.
Place the coolant hose "arrow" onto the oil radiator.
Drain plug of the coolant drain opening "arrow". Prepare the required amount of coolant in a suitable container, pre-mixed in the correct ratio. Fill the cooling system through the filler tank filler neck until the level reaches the maximum mark. Close the expansion tank. Leave the engine running until the fan starts. After covering the cork with a rag, carefully open it. Check the coolant level and top up if necessary. In a warm engine, the coolant level should be at the "max" mark, and in a cold engine, between the "min" and "max" marks.
