Installing rear door seals
1 – door opening seal; 2 – lower door seal; 3 – piston; 4 – side door seal
1. To replace the lower seal 2 (see figure Installing front door seals) doors, remove the pins 3 from the door panel and remove the seal 2.
2. Install the new seal in reverse order.
3. To replace the side seal 4, peel the seal off the door. Clean off any remaining old glue from the door, degrease the attachment point and glue on the new seal.
4. To replace the door opening seal 1, remove the corresponding trim and then the seal.
5. Start installing the new seal from the top of the opening. In this case, the joint of the seal must be located on the middle pillar of the body at a distance of A = 300 mm from the threshold.