Wheel assembly diagram - disc brake mechanism
1 - Phillips head screw, 4 Nm; 2 - Brake disc; 3 - Cap, replace after each removal; 4 - Twelve-sided nut, self-locking, 70 Nm +30°, replace after each removal; 5 - Wheel hub with wheel hub bearing, for vehicles with ABS, the sensor disc of the pulse sensor (pulse ring) built into the wheel hub, the wheel hub and wheel hub bearing form one single part; it is gapless and does not require maintenance; the touch disc cannot be adjusted or repaired (pulse ring) ABS devices cannot be changed independently; 6 - Bridge beam, welded; 7 - Hexagon socket head cap screw, 30 Nm + 30°; 8 - Protective sheet; 9 - Brake mechanism shield (brake shoe holder) with a disc brake caliper; 10 - axle stub (journal); 11 - Non-slipped head bolt, 30 Nm + 90°, replace after each removal