Folding down the rear seat cushion
1 – pillow; 2 – seat belt; 3 – seat belt buckles; 4 – seat back
To transport large loads, you can increase the trunk capacity by folding the rear seat. On models with a split rear seat, this can be done partially.
1. Move the front seats so that they do not interfere with the rear seat being folded down.
2. Lift the front edge of the cushion 1 (see the figure Folding the rear seat cushion) back seat.
3. Then, pulling it by the rear edge, install cushion 2 vertically behind the backrests of the front seats. If necessary, pillow 2 can be removed from the passenger compartment. To do this, disengage the wire clips 1 by pressing them in the directions indicated by the arrows.
4. Release the seat backs 2 by pulling out the locking button 1. Tilt the backrests slightly and remove the headrests 3.
5. If necessary, headrests 1 can be installed in special openings on seat cushion 2. Fold seatbacks 3 to a horizontal position.
6. Assemble the rear seat in reverse order. Check that the backrests are securely fastened. When installing the cushion, remove the middle belt 2 from under it (see the figure Folding the rear seat cushion) and 3 seat belt locks.
Information presented on the website: www.SKODABOOK.ru