Removal and installation the ABS holder or ABS/ASR BOSCH 8.0, respectively.
Remove the hydraulic control unit for ABS and ABS/ASR BOSCH 8.0, respectively. Remove the holder "4" from the centering pins of the holder "2". Unscrew the screws "3" (two pcs.). Remove the holder "2" from the hydraulic control unit.
Installation is carried out in the reverse order of actions.
Tightening torque
| Holder on hydraulic control device | 8 Nm |
The original article can be found on the resource [www.SKODABOOK.ru]