Important: Before you begin installing the brake line, you must install the bracket. During installation or connection, the brake line must not be bent. The brake hoses must be installed in such a way that they do not become twisted. Under no circumstances should the brake hoses come into contact with other parts. The sealing plugs of the connections and openings through which the brake fluid is directed may only be removed immediately prior to installation. The tightening torque of the brake line pipe screw is 14 Nm.
Caution: Ensure that the brake line channels are correctly aligned. Mixing brake lines results in dangerous brake force adjustments.
Cars with ABS and ABS/ASR BOSCH 8.0, acc.
Connecting the brake lines to the master cylinder
| Pos. | Designation | Place of connection |
| 1 | HZ1 | master brake cylinder/pressure circuit |
| 2 | HZ2 | master cylinder/floating circuit |
Connecting the brake lines to the hydraulic control unit
| Pos. | Designation | Place of connection |
| 1 | VR | front right wheel disc brake caliper |
| 2 | HL | rear left wheel brake cylinder/disc brake caliper |
| 3 | HR | rear right wheel brake cylinder/disc brake caliper |
| 4 | VL | front left wheel disc brake caliper |
| 5 | HZ2 | master cylinder/floating circuit |
| 6 | HZ1 | master brake cylinder/pressure circuit |
Cars with ABS/ASR/ESP BOSCH 8.0
Connecting the brake lines to the master cylinder
| Pos. | Designation | Place of connection |
| 1 | HZ1 | master brake cylinder/pressure circuit |
| 2 | HZ2 | master cylinder/floating circuit |
Important: When tightening the pipe screw, hold the brake line with your hand at the dented area "arrow A". When tightening the pipe screw, hold the brake line with your hand at the dented area "arrow B".
Connecting the brake lines to the hydraulic control unit
| Pos. | Designation | Place of connection |
| 1 | VR | front right wheel disc brake caliper |
| 2 | HL | rear left wheel brake cylinder/disc brake caliper |
| 3 | HR | rear right wheel brake cylinder/disc brake caliper |
| 4 | VL | front left wheel disc brake caliper |
| 5 | HZ2 | master cylinder/floating circuit |
| 6 | HZ1 | master brake cylinder/pressure circuit |
[Text copied from this resource Skodabook.ru]