After releasing the spring clamp "1" on the air hose, remove the hose from the air filter. After removing the air bleed hose "2", disconnect the plug connector on the air flow meter "3". Remove the air line "4" from the air filter.
Unscrew the mounting screw "5" on the air filter. Carefully remove the entire air filter in an upward direction.
Installation
Important: Ensure that the rubber buffers on the air filter are installed correctly (on the front and back sides). Installation is carried out in the reverse order of actions. Tighten the fastening screw "5" with a torque of 8 Nm.