Remove the front bumper. To release, press the locking clamp "1" and disconnect the hose with the clamp from the washer cylinder "2". After unscrewing the screws "arrows", pull the washer cylinder "2" out of the bumper.
Installation
Installation is carried out in the reverse order of actions, and the following instructions must be followed. The tubes with plastic tips should audibly click into a locked position in the connecting elements on the windshield washer pumps. After completing the assembly work, the air must be removed from the headlight washers.
Bleeding air from headlight washers
Material is available on the website: www.skodabook.ru
After assembly work or when first commissioning, it is necessary to bleed air from the headlight washers to ensure flawless operation. Fill the windshield and headlight washer reservoir. Start the engine. Turn on the headlights. Press the headlight washers several times (3-5 pulses, each lasting 3 seconds). If necessary, repeat this air removal process until the headlight washer cylinders and spray jets operate without error.