Important: The jets are installed either with or without heating depending on the equipment and cannot be adjusted.
Remove the windshield wiper arms with blades "1". Remove the waterproof housing cover "2". If installed, disconnect the plug connectors from the spray nozzle heating device. With the safety clips removed, disconnect the fluid line leading to the sprayer nozzles (incl. plastic tip).
Press the spray nozzle "arrow A", slightly tilt it back and remove it in the upward direction "arrow B".
Installation
Installation is carried out in the reverse order of actions, and the following instructions must be observed. Press the liquid line leading to the sprayer nozzles into the clamps in the waterproof housing cover. Press the connected plug connectors of the nozzle heater into the clamping clips of the protective grille. The tubes with plastic tips should audibly enter a fixed position in the connecting elements on the jets.
Text obtained from the website: skodabook