Important: To ensure a sufficiently strong installation in the pedal support bracket, the "F36" clutch pedal switch only needs to be installed once.
Remove the lower cover on the driver's side. Disconnect the plug connector from the clutch pedal switch.
Turn the clutch pedal switch "F36" "2" in the pedal support bracket 45° to the left and remove it from the clutch.
Important: The clutch pedal remains in the neutral position (not pressed).
Installation and adjustment
Before installing the clutch pedal switch "F36", pin "3" must be completely removed. Clutch pedal "4" is in the neutral position. Insert the F36 clutch pedal switch through the assembly opening, secure it by pressing against the clutch pedal and turning it 45° to the right. Connect the F36 clutch pedal switch plug connector.
The original article is available on: SkodaBook
Install the lower cowl on the driver's side.