Important: The areas under the bushings and sliding surfaces must be lubricated with grease "G 000 450 02"
1 - Retaining ring; 2 - Compression spring; 3 - Seal, between the gearshift housing and the body, self-adhesive, glued to the gearshift housing; 4 - Gear shift lever; 5 - Gear shift housing; 6 - Lid, for removal purposes straighten the tabs first; 7 - Cable bushing for preselective gear shift control device; 8 - Cable drive for the preselective gear shift control device, to the preselective gear shift control crank; 9 - Bowden cable drive for gear shifting, mounted on the gear shift lever guide; 10 - 23 Nm, 4 pcs.
Removal and installation the retaining ring
To remove and install the retaining ring "arrow A", use a screwdriver to press the spring "B" in the direction of the arrow "arrow C" and remove the retaining ring.
Important: The slot for the retaining ring in the gear shift lever must be visible. Carefully release the spring.