Assembly diagram of the parking brake system engagement lever
- 1 - Parking brake system engagement lever
- 2 - Handle of the parking brake system engagement lever
Removal
Use a screwdriver to release the pawl on the underside of the handle and simultaneously remove the handle in a forward direction.
Installation
Set the handle all the way so that the handle pawl enters the locked position in the recessed area of the lever. Check entry into a fixed position.
- 3 - Leveling clamp
- 4 - Adjusting nut
- 5 - Bushing
Removal
Remove the cable from the guide tube. Remove the bushing. Remove the bushing from the guide tube.
Installation
Installation is carried out in the reverse order of actions. After installation, you should check that the bushing is correctly installed in the body hole.
- 6 - Right guide tube, for the parking brake system drive cable
- 7 - Left guide tube, for the parking brake system drive cable
- 8 - Parking brake system drive cable
- 9 - Mounting location (support) for the parking brake system engagement lever
- 10 - Switch for the parking brake system indicator "F9"
- 11 - Self-locking nut, 20 Nm + 90°, replace after each removal