Camshaft drive parts
1 – upper belt cover; 2 – camshaft drive belt; 3 – tension roller mounting nut; 4 – tension roller; 5 – camshaft pulley hub mounting bolt; 6 – camshaft pulley mounting bolt; 7 – camshaft pulley; 8 – pulley hub; 9 – bolt; 10 – rear belt cover; 11 – bushing; 12 – tensioner; 13 – guide roller; 14 – water pump; 15 – crankshaft pulley; 16 – pulley mounting bolt; 17 – water pump mounting bolts; 18 – guide roller mounting bolt; 19 – lower belt cover; 20 – generator drive pulley; 21 – pulley mounting bolt; 22 – middle belt cover; 23 – powertrain support bracket mounting bolt; 24 – powertrain support bracket
Replace the camshaft drive belt if, upon inspection, you find:
- traces of oil on any surface of the belt;
- traces of tooth wear;
- cracks, folds, cuts, delamination of rubber, bulges on the outer surface.
Caution: If the belt is not being removed for replacement, mark its direction of rotation, as changing the direction of rotation will cause the belt to wear out quickly.
The camshaft drive components are shown in the figure Camshaft drive components for 1.4L, 55 and 74 kW engines and drawing of the camshaft drive parts.
Tightening torques, Nm
| Tension roller mounting nut | 20 and turn 45° |
| Camshaft pulley hub mounting bolt | 100 |
| Camshaft pulley mounting bolt | 25 |
| Rear belt cover mounting bolt | 10 |
| Crankshaft pulley mounting bolt | 120 and turn 90° |
| Water pump mounting bolt | 15 |
| Guide roller mounting bolt | 20 |
| Generator drive pulley mounting bolt | 10 and turn 90° |
| Right powertrain support bracket mounting bolt | 45 |
[Data taken from an online portal SKODABOOK]