Fuel vapor recovery system parts
1 – adsorber purge hose; 2 – adsorber mounting bolt; 3 – throttle body; 4 – electromagnetic valve; 5 – valve connecting block; 6 – adsorber; 7 – hose to gravity valve
Vehicles with gasoline engines are equipped with a fuel vapor recovery system. The adsorber is installed in the niche of the right rear wheel.
1. Remove the right rear wheel.
2. Disconnect hoses 1 and 7 from adsorber 6.
The original article can be found on the resource SKODABOOK
3. Unscrew the mounting bolt 2 and remove the adsorber 6, taking it out of the bracket on the body.
4. Install the new canister in reverse order. The tightening torque of the adsorber mounting bolt is 10 Nm.